Alto-shaam HFM-30 Manuel d'utilisateur télécharger pdf (Page 4)

#809 Operation & Care Manual • 3.

The appliance, complete with unattached

i

tems and accessories should be checked to

ensure all the ordered items have been received.

This Alto-Shaam appliance is designed for the

purpose of maintaining hot food at a temperature

for safe consumption. The unit must be

installed on a level surface in a location that will

permit the equipment to function for its intended

purpose and allow adequate access for proper

cleaning and maintenance.

The appliance must not be installed in any

area where it will be affected by steam, grease,

dripping water, high temperatures, or any other

severely adverse conditions.

1. When mounting the module, apply a food

grade silicone along the bottom of the

support flanges, place the module through

the opening on counter top. Let silicone

cure according to the manufacturer’s

recommendations before putting module

into service.

2. Peel the protective film from the VHB tape

located on the inside flanges of decor face.

Press decor face (control) up against the

mounting surface.

3. Level the appliance from side-to-side and

front-to-back with the use of a spirit level.

4. Follow solid surface material manufacturer ’s

instructions for its installation.

5. In order to maintain standards established

by the National Sanitation Foundation, all

edges must be sealed to the heated module

with NSF approved sealant.

I N S T A L L A T I O N

SITE INSTALLATION

TO PREVENT PERSONAL INJURY,

USE CAUTION WHEN MOVING OR

LEVELING THIS APPLIANCE.

1 2 3 4 5 6 7 8 9 ... 15 16

Commentaires sur ces manuels

Pas de commentaire