Alto-Shaam QC-50 Instructions d'exploitation télécharger pdf (Page 5)

#891/3 • INSTALLATION/OPERATION/SERVICE MANUAL • 4.

INSTALLATION

1. An identification tag is permanently mounted

on the cabinet.

2. Plug the unit into a properly grounded

receptacle ONLY. Arcing will occur when

connecting or disconnecting the unit unless

all controls are in the “OFF” position.

3. Position the unit so the cord is easily accessible

in case of any emergencies. If necessary, a

proper receptacle or outlet configuration, as

required for the unit, must be installed by a

licensed electrician in accordance with

applicable, local electrical codes.

230V:

To prevent an electrical shock hazard between the

appliance and other appliances or metal parts in

close vicinity, an equalization-bonding stud is

provided. An equalization bonding lead must be

connected to this stud and the other appliances /

metal parts to provide sufficient protection

against potential difference. The terminal is

marked with the following symbol.

NOTE: The appliance must be connected to an

electrical circuit that is protected by an

external GFCI outlet.

Electrical Installation

ELECTRICAL CONNECTIONS MUST

BE MADE BY A QUALIFIED SERVICE

TECHNICIAN IN ACCORDANCE WITH

APPLICABLE ELECTRICAL CODES.

To avoid electrical shock, this

appliance MUST be adequately

grounded in accordance with local

electrical codes or, in the absence of

local codes, with the current edition

of the National Electrical Code

ANSI/NFPA No. 70. In Canada, all

electrical connections are to be made

in accordance with CSA C22.1,

Canadian Electrical Code Part 1 or

local codes.

NEMA 6-20P

20A-250V PLUG

CEE 7/7

220-230V PLUG

NEMA 6-20P

20A-250V PLUG

CEE

7/7

220-230V

PLUG

ELECTRICAL – Model 10•18 COMBIMATE

VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG INCLUDED

at 208 1 50/60 13.2 2.8

at 240 1 50/60 15.4 3.7

at 230 1 50/60 14.7 3.4

NEMA 6-20P

20A - 250V PLUG

CEE

7/7

220-230V PLUG

230 208-240

ELECTRICAL – Model 12•20 COMBIMATE

VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG INCLUDED

at 208 1 50/60 14.4 3.0

at 240 1 50/60 16.2 3.9

at 230 1 50/60 14.8 3.4

230 208-240

ELECTRICAL – Model 20•20 COMBIMATE

VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG INCLUDED

at 208 1 50/60 14.4 3.0

at 220 1 50/60 15.0 3.4

at 240 1 50/60 16.7 4.0

at 230 1 50/60 15.5 3.5

230 240 - 220 - 208

1 2 3 4 5 6 7 8 9 10 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Alto-Shaam QC-50 Instructions d'exploitation Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Alto-Shaam QC-50